Skip to content

Crane and rigging

Know your crew's qualifications before the lift.

Operators, riggers, signal persons, mechanics and drivers each carry a different stack of cards. CrewSafety keeps every one on the person's profile, warns before one runs out, and puts the lift crew's JHA and signatures on the same project.

Every part of the application on every plan, Free included.

The dashboard of a crane and rigging company in CrewSafety, with compliance, certification alerts and recent incidents
  • Operator and rigger cardsEach one with its issuer, card number and expiration date on the person's profile.
  • Requirements by job titleA rigger and a crane operator are held to different lists, set once.
  • The lift crew's JHAHazards and controls for the pick, signed by each person with their own PIN.

Where it comes from

CrewSafety began as software built for Lampson International, the worldwide heavy lift and transport company. We took that foundation and built it out for general contractors and the other trades.

The lists

What a crane and rigging crew carries

Training everyone takes, the qualifications that go with a role, the job titles that tie them together and what gets reported.

Core training

Awareness training for everyone

  • Safety Orientation
  • Hazard Communication (HazCom)
  • PPE Awareness
  • Fall Protection Awareness
  • Rigging Safety Awareness

Qualifications

Cards and licenses held by role

  • First Aid/CPR/AED
  • NCCCO Mobile Crane Operator
  • Signal Person
  • Rigger Level I
  • Rigger Level II
  • Fall Protection Competent Person
  • Aerial/Scissor Lift Operator
  • Forklift Operator
  • OSHA 30
  • CDL Class A

Job titles

Each with its own required list

  • Mobile Crane Operator
  • Tower Crane Operator
  • Rigger
  • Signal Person
  • Crane Mechanic
  • Boom Truck Operator
  • Site Superintendent
  • Safety Coordinator
  • CDL Driver

Incident categories

On the demo account's incident log

  • Struck-By
  • Caught-In
  • Overhead
  • Slip/Trip/Fall
  • Sprain/Strain
  • Electrical

These lists are what our crane and rigging demo account is set up with. In your account, every training type, how long it lasts and every job title is yours to set in Settings.

01/The roster

The whole crew on one list, with what is out of date.

Operators, riggers, signal persons, mechanics and drivers, by yard. Each row shows whether the person's cards are current, expiring or missing, so the yard knows who can go out before the trucks leave.

The employee list of a crane and rigging company, with job titles, locations and certification status

02/Training matrix

A rigger and an operator are not held to the same list.

Tick what each job title must hold. A rigger needs rigging awareness and their rigger level; a mobile crane operator adds the operator card. A person given the title gets the list the same day.

The training matrix of a crane and rigging company, with required training ticked for each job title

On the job

What a week looks like

Four ordinary days, and where CrewSafety sits in each of them.

  1. Monday: the new rigger checks in

    At the yard tablet he enters his legal name, phone and emergency contact, sets his own PIN and starts the training assigned to him.

  2. Tuesday: the lift crew signs the JHA

    The crew reviews the hazards and controls for the pick, and each person signs with their own PIN before work starts.

  3. Wednesday: a card comes due

    An operator's NCCCO Mobile Crane Operator certification is approaching expiration. The employee and supervisor receive a reminder based on the timing you set.

  4. Thursday: the packet goes to the GC

    The job packet PDF lists the supervisor's and the crew's certifications for that project, ready to send before mobilizing.

03/Job hazard analysis

The JHA for the pick, signed by the crew doing it.

Steps, hazards, controls, PPE and risk before and after, with the crew's PIN signatures on the record. A change in the field, like the wind picking up, is logged and the crew signs the new revision.

The JHA builder in a crane and rigging company's account, with steps, hazards and controls

Questions

About CrewSafety for crane and rigging

01Does CrewSafety track NCCCO certifications?
Yes, as a qualification on the person's profile with its issuer, card number and expiration date, and an alert before it runs out. CrewSafety keeps the record; it does not issue the card or check it with the certifying body.
02Can riggers and signal persons have different requirements from operators?
Yes. The training matrix sets required training per job title, so each title carries its own list and each person sees which requirements they still need to complete.
03Is the list of crane and rigging training on this page built in?
No. It is what our crane and rigging demo account is set up with. In your account you add your own training types, how long each one lasts and your own job titles in Settings.

Load your own crane and rigging crew.

Start free, add your training types and job titles, and judge it on your own roster instead of a demo.

Try up to 500 profiles for 14 days, then keep five profiles on Free. No card required.